Let's Try Challenge... September *WINNER CHOSEN*

Moderator: ACOT Employee

User avatar
Sara Scraps
Cherry Bing
Posts: 2707
Layouts: 978
Location: Western Pennsylvania

Let's Try Challenge... September *WINNER CHOSEN*

Post by Sara Scraps » Wed Sep 02, 2020 4:23 pm

Let's Try ...September 
For September let's continue and put Natalie's amazing Freshen Up blog series to good use.
FOR THIS MONTH'S CHALLENGE, PULL OUT YOUR METAL DIES AND USE THEM ON A PAGE!
If you dont have metal dies, you may dust off your electronic cutting machine and use a cut file.
If you have neither, you may use at least 3 store bought die cuts on your project. 
But, if you do have some dies, let's dust them off and put them to good use! 
I will have a video and project for you Thursday using my metal dies! 
RULES-
- all new projects are due to this thread by September 31st at midnight EST. 
- I will choose one winner to receive a $5 gc. to ACOT on Oct. 1st.
-you may combine this with other challenges
- you may enter more then once
- projects must be NEW and created during September to count. 
I think thats it! 

And The Winner Is.... aheatfan

Sorry Im so late picking a winner...its been a bit crazy the beginning of this month! 
I'll get your GC out to you right now. 
And I'll have a new challenge as soon as I get it typed up! 
 
Last edited by Sara Scraps on Wed Oct 07, 2020 8:14 am, edited 2 times in total.

User avatar
Deanna13
Cherry Crush
Posts: 37089
Layouts: 3527
Location: Southeastern Ohio

Re: Let's Try Challenge... September

Post by Deanna13 » Wed Sep 02, 2020 4:34 pm

I don't have any special die cutting machines so I'll be using some prepackaged diecuts.
 Image Image

Visit my Scrap Blog - Moments to Cherish Image

User avatar
traveler
Cherry Bing
Posts: 2574
Layouts: 315
Location: New Jersey

Re: Let's Try Challenge... September

Post by traveler » Wed Sep 02, 2020 5:33 pm

Great challenge! I have so many metal dies but I only use the same few again and again. 

I have a question, is it layouts only or can we do a card?

 

User avatar
blbabe1234
Cherry Bark
Posts: 66878
Layouts: 3038
Location: Corpus Christi, TX

Re: Let's Try Challenge... September

Post by blbabe1234 » Wed Sep 02, 2020 6:13 pm

This is great!!! I have a few metal dies, but only use the same 2-3 over and over again.
Brandy Williams

Image  Image Image

User avatar
Sara Scraps
Cherry Bing
Posts: 2707
Layouts: 978
Location: Western Pennsylvania

Re: Let's Try Challenge... September

Post by Sara Scraps » Wed Sep 02, 2020 6:28 pm

trainmom wrote:
Wed Sep 02, 2020 5:33 pm
Great challenge! I have so many metal dies but I only use the same few again and again. 

I have a question, is it layouts only or can we do a card?

 

Cards are fine with me.

User avatar
aheatfan
Cherry Berry
Posts: 755
Layouts: 318

Re: Let's Try Challenge... September

Post by aheatfan » Wed Sep 02, 2020 6:30 pm

No metal dies but do have a Cricut, sounds fun :)
🌴Kristin  
"Be the Change You Wish to See in the World"
Image

User avatar
jonali
Cherry Tart
Posts: 1

Re: Let's Try Challenge... September

Post by jonali » Wed Sep 02, 2020 6:51 pm

SMMishler wrote:
Wed Sep 02, 2020 4:23 pm
Let's Try ...September 
For September let's continue and put Natalie's amazing Freshen Up blog series to good use.
FOR THIS MONTH'S CHALLENGE, PULL OUT YOUR METAL DIES AND USE THEM ON A PAGE!
If you dont have metal dies, you may dust off your electronic cutting machine and use a cut file.
If you have neither, you may use at least 3 store bought die cuts on your project. 
But, if you do have some dies, let's dust them off and put them to good use! 
I will have a video and project for you Thursday using my metal dies! 
RULES-
- all new projects are due to this thread by October 31st at midnight EST. 
- I will choose one winner to receive a $5 gc. to ACOT on Oct. 1st.
-you may combine this with other challenges
- you may enter more then once
- projects must be NEW and created during September to count. 
I think thats it! 
Great!
 

User avatar
blfonty
Cherry Cola
Posts: 5362
Layouts: 689
Location: East Tennessee

Re: Let's Try Challenge... September

Post by blfonty » Wed Sep 02, 2020 6:58 pm

I still have my QK dies and will happily pull them out for this challenge! Thanks for the inspiration.
blfonty a.k.a. Bonnie

 Image.   

User avatar
scrapy1967
Cherry Jubilee
Posts: 12208
Layouts: 1346
Location: Ohio

Re: Let's Try Challenge... September

Post by scrapy1967 » Thu Sep 03, 2020 7:18 am

Love this challenge!! I needed a quick birthday card this morning so I whipped this up using a Diamond press die set. Image
ImageImage 
 

User avatar
Aztam
Cherry Picker
Posts: 668
Layouts: 152
Location: Baja AZ

Re: Let's Try Challenge... September

Post by Aztam » Thu Sep 03, 2020 8:38 am

I just got a couple of die and stamp sets. I will try them out for this challenge!
👋

Tam

User avatar
traveler
Cherry Bing
Posts: 2574
Layouts: 315
Location: New Jersey

Re: Let's Try Challenge... September

Post by traveler » Thu Sep 03, 2020 1:21 pm

I used 4 metal dies on this card: the circle, the grapes, the leaves at the top, the black behind the leaves.
Image
combined with the manufacturer challenge. 

User avatar
Yankeegirl
Cherry Bomb
Posts: 3878
Layouts: 1268
Location: Lititz PA

Re: Let's Try Challenge... September

Post by Yankeegirl » Fri Sep 04, 2020 2:07 pm

I have tons of dies, but mostly use them on cards.  Will be fun to use them on a page.  Great challenge!
Autumn is the season that teaches us that change can be beautiful.

Kathy
Image                Image

User avatar
JAire
Sweet Cherry Pie
Posts: 1325
Layouts: 419
Location: FL Space Coast

Re: Let's Try Challenge... September

Post by JAire » Fri Sep 04, 2020 6:19 pm

I used metal dies for flourishes, the corner, and flowers. Also for the Sept double page LO.
Image
Joyce Ann

User avatar
MrsFleck
Cherry Tart
Posts: 60
Layouts: 56
Location: AR - Arkansas

Re: Let's Try Challenge... September

Post by MrsFleck » Sun Sep 06, 2020 2:22 pm

I used my die cut machine to create the butterflies and I also used my silhouette to cut a couple dies...the huge circle with a flower cluster and the flower cluster in the top right!
Image

User avatar
all4ty
Cherry Blossom
Posts: 482
Layouts: 325

Re: Let's Try Challenge... September

Post by all4ty » Sun Sep 06, 2020 7:38 pm

Image

I used my silhouette
Pam
 

User avatar
Aztam
Cherry Picker
Posts: 668
Layouts: 152
Location: Baja AZ

Re: Let's Try Challenge... September

Post by Aztam » Mon Sep 07, 2020 2:16 am

Lemonade cutfile, banner punches
Image
👋

Tam

User avatar
scrappinmom99
Cherry Cola
Posts: 5642
Layouts: 984
Location: NYC

Re: Let's Try Challenge... September

Post by scrappinmom99 » Mon Sep 07, 2020 10:06 am

I don't have any die cutting machines either so I'm going to bash my (extensive LOL!) die cut stash! Here's a housewarming card for my BFF.


Image
Happy Scrapping!
Anne-Marie
Image

User avatar
druffing
Cherry Blossom
Posts: 317
Layouts: 331
Location: SW Pennsylvania

Re: Let's Try Challenge... September

Post by druffing » Mon Sep 07, 2020 12:29 pm

It says you will pull a winner on October 1 but also in another line it says that they are due October 31.  I am not understanding...can you please explain?
Thank you.
Debra
Debra R. 
Nana of 5, Mama of 2, Disney Addict
https://www.facebook.com/groups/1nana2girlsscrapbook/

   ImageImage

User avatar
lissahope26
Cherry Bomb
Posts: 3133
Layouts: 1249
Location: South Louisiana

Re: Let's Try Challenge... September

Post by lissahope26 » Mon Sep 07, 2020 2:05 pm

I used 6 dies on this page.
Image
Melissa H.
ImageImageImage
Image

 

User avatar
traveler
Cherry Bing
Posts: 2574
Layouts: 315
Location: New Jersey

Re: Let's Try Challenge... September

Post by traveler » Mon Sep 07, 2020 3:19 pm

I only used one metal die on this one, the stitched circle from Pink & Main
Image
combined with the My Mood challenge

Post Reply

Return to “Contests & Challenges”